3528 60LEDs/m 4.8W/m 8mm 90lm/w 5m/roll 3528 60.pdf
- High brightness, low decay, stable quality,
- Long lifespan above 30,000hours, warranty 3 - 5 years
- Uniform color, wide color temperature for option,
- Warm white: 2400K / 2700K - 3000K,
- Natural white: 4000K - 4500K,
- White: 5000K - 5500K / 6000K - 6500K
- Complete cut / connection accessories
- Easy to use and install, IP20/IP65 with 3M tape 200MP/300MP, IP67
with clips or glues
- Constant voltage version, low power consumption
- Cove lighting
- Architectural lights for canopy, archway
- Backlight or edge lighting for signage
- DIY lights for home use
- Path and contour marking
- Decorative lights for holiday, event, show, exhibition, hotel
LED Qty /meter
Type of protection
12 (24 option)
Warm white/Natural white/White
Natural white :4000-4500
Color rendering index
meters per box
reels per box
Shipping carton box
Shipping carton box
- The strip itself and all its components may not be mechanically
- Assembly must not damage or destroy conducting paths on the circuit
- Installation of LED ribbon (with power supplies) needs to be made
with regard to all applicable electrical and safety standards. Only qualified
personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity
may destroy the strip.
- Parallel connection is highly recommended as safe electrical
- Serial connection is not recommended. Unbalanced voltage drop can
cause hazardous overload and damage the strip.
- Please ensure that the power supply is of adapters power to operate
the total load.
- When mounting on metallic or otherwise conductive surfaces, there
needs to be an electrical isolation points between strip and the
- Pay attention to standard ESD precautions when installing the
- Damaged by corrosion will not be honored as a materials defect
claim. It is the user’s responsibility to provide suitable
protection against corrosive agents such as moisture and
condensation and other harmful elements.
- Caution needs to be taken while doing the connection after cutting
the strip. Only authorized professionals can do the work to enable
it waterproof in wet locations.