Decorative 24 Volt 5M 5050 RGB 300 SMD LED Strip Lights 32W 120 LED
5050 120LED dual CC is 5m long flexible strip with
5050SMD 600LED as source, 20mm white PCB (2Oz) in 24V,6 whites
(2200-6500K) and colors of R/G/B/Y/A/O/P/PP options, IP20 with 3M
or clips mounted easily
IP20: bare, max. light output and the best color consistency,
- Backlight or edge lighting for signage
- Cove lighting
- Architectural lights for canopy, archway
- DIY lights for home use
- Path and contour marking
- Decorative lights for house, event, show, exhibition, hotel
LED Qty /meter
Type of protection
IP20 / IP65
2360 - 2484
Warm white/Natural white/White
Color rendering index
meters per box
reels per box
Shipping carton box
- The strip itself and all its components may not be mechanically
- Assembly must not damage or destroy conducting paths on the circuit
- Installation of LED ribbon (with power supplies) needs to be made
with regard to all applicable electrical and safety standards. Only
qualified personnel should be allowed to perform installations.
- Correct electrical polarity needs to be observed. Wrong polarity
may destroy the strip.
- Parallel connection is highly recommended as safe electrical
- Serial connection is not recommended. Unbalanced voltage drop can
cause hazardous overload and damage the strip.
- Please ensure that the power supply is of adapters power to operate
the total load.
- When mounting on metallic or otherwise conductive surfaces, there
needs to be an electrical isolation points between strip and the
- Pay attention to standard ESD precautions when installing the
- Damaged by corrosion will not be honored as a materials defect
claim. It is the user’s responsibility to provide suitable
protection against corrosive agents such as moisture and
condensation and other harmful elements.
- Caution needs to be taken while doing the connection after cutting
the strip. Only authorized professionals can do the work to enable
it waterproof in wet locations.